VARIOS
Photocell switch for obstruction light (115 Vac).
Photocell switch for obstruction light (115 Vac).
Couldn't load pickup availability
Photocell switch for obstruction light (115 Vac).
Operating temperature: -40°C to 60°C
Operating current: 105-130 VAC (50/60Hz)
Capacity: 1500 W
Made in Mexico.
Instructions:
Mounting : When placing the unit into the three-pole receptacle, insert all three terminals, press down while rotating the control from left to right, maximum reaction to spectrum sensitivity is obtained when the indicator (N) is oriented towards the north.
The lamp will turn on when the photocontrol is installed. If installed during the day, it will turn off after a short delay. To turn the lamp back on after installation, cover the photocontrol. Turning on will occur after the delay period (5-15 seconds). The delay length varies depending on the ambient light.
Calibration : The photocontrols are factory-set to normal light levels. If you require other levels, please request them from the factory.
Warning : This photocontrol must be exposed for 2 to 3 hours after unpacking before it will react to the light level for which it was calibrated.
Share
11 in stock
MODELO: 20-03A
View full details


