MIKROTIK
(hEX PoE) Routerboard 5 Gigabit Ethernet PoE ports 802.3at, 1 USB port
(hEX PoE) Routerboard 5 Gigabit Ethernet PoE ports 802.3at, 1 USB port
Couldn't load pickup availability
(hEX PoE) Routerboard 5 Gigabit Ethernet PoE ports 802.3at, 1 USB port
hEX PoE
The hEX PoE is a five-port Gigabit Ethernet router for locations where wireless connectivity isn't required. The device has a USB 2.0 port and an SFP port for adding fiber optic connectivity. Ports 2-5 can power other PoE-capable devices with the same voltage applied to the unit.
It's affordable, small, and easy to use, yet it comes with a very powerful 800 MHz CPU, capable of all the advanced configurations of RouterOS. Fewer power adapters and cables to worry about! The maximum current is 1A per port, and the Ethernet ports are shielded.
It also supports standard 802.3at/af or passive PoE input / output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage applied to the unit. Fewer power adapters and cables to worry about! Can power af/at mode B (4,5+) (7,8-) compatible devices , if using 48-57 input voltage, (48volt power supply sold separately).
Important Note: When using the 48 ~ 56 V source, it will only power 802.3af/at devices.
*1 year warranty.
Main features of RouterOS
General Specifications
Details | |
---|---|
Product Code | RB960PGS |
Architecture | MIPS-BE |
CPU | QCA9557 |
Number of CPU Cores | 1 |
CPU frequency | 800 MHz |
License level | 4 |
RAM memory | 128 MB |
Storage | 16 MB |
Storage type | FLASH |
Operating temperature | -40 + 70 C |
Feeding
Details | |
---|---|
Energy consumption | 9W |
Power supplies | 2 (DC jack, PoE-IN) |
PoE power supply | Passive PoE |
Input voltage on jack | 12-57 V DC |
Input voltage in PoE | 12-57 V DC |
PoE output | 802.3af/at requires 48-57 V DC power supply |
Ethernet
Details | |
---|---|
Ethernet ports | 5 x 10/100/1000 Mbps |
Fiber
Details | |
---|---|
SFP port | 1 |
Peripherals
Details | |
---|---|
Number of USB ports | 1 |
USB Power Reset | Yeah |
USB slot type | USB Type A |
Others
Details | |
---|---|
PCB Temperature Monitor | Yeah |
Voltage Monitor | Yeah |
Ethernet Test Results
RB960PGS | QCA9557 (800Mhz) 1G all port test | ||||||
Mode | Configuration | 1518 bytes | 512 bytes | 64 bytes | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 161.9 | 1,966.1 | 401.5 | 1,644.5 | 542.3 | 277.7 |
Bridging | 25 bridge filter rules | 143.2 | 1,739.0 | 145.5 | 596.0 | 146.2 | 74.9 |
Routing | none (fast path) | 161.9 | 1,966.1 | 396.3 | 1,623.2 | 521.7 | 267.1 |
Routing | 25 simple queues | 161.9 | 1,966.1 | 217.2 | 889.7 | 216.0 | 110.6 |
Routing | 25 IP filter rules | 74.6 | 905.9 | 78.0 | 319.5 | 76.5 | 39.2 |
- All tests are done with Xena Networks specialized test equipment (XenaBay), and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0.1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Parts Included
*Images are merely illustrative.
- 5 Gigabit Ethernet ports, 4 PoE 802.3af/at, 1 SFP port, 1 USB port, Power: DC Jack or Passive PoE, License Level: 4
Share
337 in stock
MODELO: RB960PGS
View full details




