Pack of 4 UltraDish 27.5 dBi antennas, TwistPort connector and innovative mount.

Pack of 4 UltraDish 27.5 dBi antennas, TwistPort connector and innovative mount.

TwistPort ^™ Antenna Connection - Quick-Lock Waveguide Port
Antenna type: Parabolic dish
Gain 27.5 dBi
Environmental IP65
Pole mounting diameter 22-80 mm
Temperature - 40 to +60°C (-40°F to +140°F)
Wind Survival 160 km/h
Antenna compatibility
Any TwistPort ^TM adapter with TwistPort ^TM connector
Any SIMPER ^TM radio with TwistPort ^TM connector

High gain directional antennas

UltraDish™ TP antennas are high-gain, directional satellite dishes with a lossless TwistPort™ connector. The antennas are highly directional and have suppressed sidelobes for maximum performance.

Performance Beam

UltraDish™ TP antennas have suppressed sidelobe radiation, reducing interference and allowing installation in areas with high noise levels. The UltraDish™ TP antennas' gain is achieved by focusing the signal delivered through the TwistPort™ waveguide.

Broadband 5.1 - 5.9 GHz

Starting with the 'V2' version, you can enjoy all the benefits of the TwistPort™ ecosystem and the excellent broadband performance of TP antennas. TwistPort™ V2 adapters cover the ultra-wideband spectrum: 5180–6400 MHz.

TwistPort TM connector

The TwistPort™ connector is a virtually lossless, quick-locking waveguide port that connects the radio to the antenna. The TwistPort™ connector is our design and sets a new standard for outdoor wireless equipment in terms of performance, scalability, ease of use, and simplicity of deployment.

Easy connection

TwistPort™ is the new definition of 'easy.' By integrating the mechanical and RF connections into the same structure, connecting the radio to the antenna is incredibly simple: 'twist and lock,' and can be done with just one hand!

No loss

TwistPort™ connectors are virtually lossless: there are no coaxial RF connectors or RF cables to cause significant signal loss. Compared to widely used coaxial cables and connectors, the loss in TwistPort™ is almost immeasurable.

Cross-platform compatibility

UltraDishTM TP antennas can be used with any radio with a TwistPortTM interface or with a variety of third-party radios connected via a TwistPortTM Adapter .

Innovative assembly

UltraDish™ TP antennas feature a new and innovative mounting system. The mount is separate from the antenna, making installation and adjustment quick and easy.

Step 1: Installing the bracket

First, install the bracket on the pole. Two sets of pole screws are included for different pole diameters.
The polar mount is reversible: it can be mounted on the left or right side of the antenna.

Step 2: Adjusting the Antenna

Simply slide the antenna onto the mount and adjust the elevation and azimuth. Tighten the screws to complete the installation.
Only one tool is needed for the entire installation.