• Controlador MAESTRO para Control de Elevadores / Control de Acceso para los pisos de los Elevadores por Huella o Tarjeta / Programación por IVMS4200 o Interfaz Web
1 5

HIKVISION

MASTER Controller for Elevator Control / Access Control for Elevator Floors by Fingerprint or Card / Programming by IVMS4200 or Web Interface

MASTER Controller for Elevator Control / Access Control for Elevator Floors by Fingerprint or Card / Programming by IVMS4200 or Web Interface

$1.455.331 COP
$1.591.769 COP $1.455.331 COP
Sale Sold out
Shipping calculated at checkout.

MASTER Controller for Elevator Control / Access Control for Elevator Floors by Fingerprint or Card / Programming by IVMS4200 or Web Interface

Main features:
  • Supports permits up to 128 floors.
  • TCP/IP communication.
  • Supports up to 2 Wiegand or RS-485 card readers
  • Supports up to 20,000 cards.
  • (Does not support password access)
  • Input Interface: 1 Panic Button, 1 Fire Alarm Button, 1 Conservation Button.
  • Warranty: 2 Years.
Physical and Electrical Characteristics:
  • Operating voltage: 12VD (Power supply not included)
  • Operating temperature: -4°C to 70°C (40°F to 158°F)
  • Dimensions: 167 (L)mm *105 (W)mm *30 (H) mm
  • 5 relay outputs (For linking, not for floor control)
  • Supports up to a maximum of 24 slave distributors which can control up to 16 floors each ( DS-K2M0016A )
Highlighted Features:

The HIKVISION elevator controller comprises a main elevator controller (Master) and distributed elevator controllers (Slave). It can be used in buildings, public areas, hotels, corporate buildings, etc.

This model is only the master controller , to control the floors the DS-K2M0016A distributor is required for every 16 floors to be controlled.

Slave Distributor REQUIRED

Model: DS-K2M0016A

  • Up to 24 slave distributors with 16 floors to be controlled by each one.
  • Manage permissions for different people , enabling only the floor that person can go to (they must swipe their fingerprint or card to enable the floor corresponding to their access level).
  • Zero complications since it is not necessary to interact with the main control panel of the elevator but rather, an interconnection is made with the elevator button panel (using the relays of the slave distributor DS-K2M0016A ), in such a way that when there is correct access then the button panel is enabled (only the buttons to which the person has access).

In your project you should consider the following for each elevator cabin:

  • 1 DS-K2210 Master Controller.
  • 1 DS-K2M0016A slave controller (at least 1, depends on the number of floors).
  • 1 Wiegand / RS485 reader (e.g. a DS-K1T671M facial reader).
  • Administration is via IVMS4200 ( supports up to two elevator cabins ). HikCentral software is required to control more than two elevator cabins.

Hikvision elevator solution demonstration with real elevator button panel

    Permit for up to 128 floors.

Out of stock

MODELO: DS-K2210

View full details