• Video intercom function to connect with monitor and HikConnect App.
• 1080p camera with IR, H.264, 129° angle.
• Access control function.
• IR 3m
• Built-in Microphone and Speaker.
• Two-way audio
• WDR
• Protocol: TCP/IP 10/100 mbps, RTSP, Self-Adaptive Ethernet.
• Alarm input: 4 in
• RS485 x 1
• Supports up to 128 Mifare cards (13.56MHz)
• Relay Output x 1
• SD memory slot not functional at the moment
• Warranty: 2 years.

• Operating voltage: 12 VDC, PoE Standard IEEE802.3af - (Power supply not included)
• Consumption: 10W
• Protection level: IP65.
• Operating Temperature: -40°C to +53°C (-40°F to 127.4°F)

*In case of connection failure with P2P platform, it may be due to reasons external to the equipment, such as network restrictions or those of the ISP.

• Basic equipment configuration click here
• If you want to perform advanced functions, configure multiple street fronts, monitors and learn more about this solution, click here.

Supports Web Interface.

Two ways to operate in Hik-Connect for remote calling and opening.

1.- It works directly to the HikConnect App WITHOUT a monitor

2.- It works linked to a monitor, and to the App.

Compatible monitors ( not combinable if more than one is required )

• DS-KH6220-LE1
• DS-KH6320-WTE1
• DS-KH8520-WTE1
• DS-KH9510-WTE1
• DS-KH9310-WTE1

Supports 6 monitors in total (1 main monitor and 5 extensions). They all ring at the same time.

Supports 9 street fronts in total (1 main and 8 slaves).

• The firmware of this model is NOT compatible with the firmware of models that do NOT have the letter (B)
• For Wi-Fi connection, it's necessary to power the device with an external power adapter (not PoE). If the wireless network quality isn't very good or stable, you may need to adjust the video settings to a lower level. It's always recommended to use a wired connection.