• TV Doorphone Function
• Remote opening from Hik-Connect App (P2P).
• 1080p camera with 3m IR, H.264, 129° angle.
• Access control function.
• Built-in Microphone and Speaker.
• Two-way audio
• WDR
• Protocol: TCP/IP 10/100mbps, RTSP, Self-Adaptive Ethernet.
• 2.4 GHz WiFi connection
• Alarm input: 4 in
• Embedded card reader; up to 10,000 Mifare cards (13.56MHz)
• Relay Output x 2 (For 2 door control)
• SD memory slot not functional at the moment.
• Warranty: 2 years.
• Basic equipment configuration click here
• If you want to perform advanced functions, configure multiple street fronts, monitors and learn more about this solution, click here.

• Operating voltage: 12 VDC, PoE Standard IEEE802.3af - (Power supply not included)
• Consumption: 10W
• Protection level: IP65 (Protected exterior) & IK08
• Operating Temperature: -40°C to +53°C (-40°F to 127.4°F)
• Dimensions 174 (height) × 83.66 (width) × 18 (length) mm

IMPORTANT NOTE: The firmware of this model is NOT compatible with the firmware of models that do NOT have letter B

Example :

• DS-KV8113-WME1
• DS-KV8213-WME1
• DS-KV8413-WME1
• DS-KV6113-WPE1

*In case of connection failure with P2P platform, it may be due to reasons external to the equipment, such as network restrictions or those of the ISP.

Details with WiFi?
Review these recommendations.

*WiFi Network Password and SSID must not contain special characters.

Two ways to operate in Hik-Connect for remote calling and opening.

1.- It works directly to the HikConnect App WITHOUT a monitor

2.- It works linked to a monitor, in this scenario the monitor must be added to the App.

Compatible monitors (not combinable if you need more than one):

• DS-KH6220-LE1
• DS-KH6320-WTE1
• DS-KH8520-WTE1
• DS-KH9510-WTE1
• DS-KH9310-WTE1

Supports 6 monitors in total (1 main monitor and 5 extensions). They all ring at the same time.

Supports 9 street fronts in total (1 main and 8 slaves).