YONUSA
Reader converter for access control (wired to wireless) / 1 Wiegand / 2 Relays / 2 Inputs / Up to 3 KM distance
Reader converter for access control (wired to wireless) / 1 Wiegand / 2 Relays / 2 Inputs / Up to 3 KM distance
Couldn't load pickup availability
Reader converter for access control (wired to wireless) / 1 Wiegand / 2 Relays / 2 Inputs / Up to 3 KM distance
It also transmits the on/off status of dry contact relays to both the transmitting and receiving devices. It replaces the wiring of a new or existing system, saving time and money when installing access control systems.
Replaces the wiring in a new or existing relay system. Ideal for controlling high-voltage devices such as motors, spotlights, air conditioners, water heaters, or control signals such as an alarm panel, as the receiver provides a dry-contact relay output.
The device consists of two modules, each with an RF transceiver and features encryption security.
Box Contents
- 1 Master module (Transmitter).
- 1 Slave module (Receiver).
- 2 power supplies.
- 2 Omnidirectional Dipole antennas.
- Avoid long runs of wiring, piping, and extra labor during installations.
- Installs in a matter of minutes.
- Up to 3KM away.
- Excellent cost/benefit compared to wired installations.
- Compatible with any device that works through Wiegand protocol.
- Compatible with 8, 26 and 34 bit systems.
- TEST function to check if there is communication on the cards
- Access control by card, biometric or keypad.
- Contains WIEGAND Transmitter and Receiver
- Center frequency: 915MHz
- Input voltage: 12 Vdc (includes eliminator)
- Transmission power: 27 dBm
- Receiving sensitivity: -132 dBm
- Temperature range: -40 to 85°C
- Wiegand Output: 1
- Relay Outputs: 2
- Dimensions: 9.5 x 9 x 4 cm
It consists of 2 teams (Master and Slave)
Master : It is responsible for receiving data from a device, it will be connected to an access control device, either by means of a keyboard, a card or a biometric system, upon receiving this data it will transmit it wirelessly to the slave module (receiver) to carry out the relevant task.
Slave : The receiver is the device responsible for receiving the encrypted commands sent by the master module (transmitter) and reproducing the information in Wiegand protocol, as well as activating the relays required to switch the connected load. In addition to using an actuator to open a door or connecting the Wiegand protocol to the desired location
Out of stock
MODELO: WIE01
View full details
