ROBOT MOP

ROBOT MOP TECHNICAL SHEET

Smart Robot Vacuum Cleaner for Home, Automatic Cleaning Machine, Mop, Sweep, Drag/Sweep

Operating mode: mechanical

Power supply mode: USB

Timing function: less than 2 hours

Switch type: touch

Cleaning route: random

Sweeper function: scrubbing

Sweeper style: smart robot

Instructions for use

1. When using the smart floor robot for the first time, please charge it for more than 6 hours (please use the original factory charging cable when charging, and the transformer should not exceed 6V). After charging is complete, turn on the main switch on the chassis, then put the wiper into the chassis of the floor cleaning machine, align the edge of the round hole in the middle of the wiper with the frame of the drive wheel, and then place it on the floor, press the start switch, the smart cleaning robot can start cleaning and dust removal work.

2. Each time the smart mop is turned on, it can run continuously for 30 minutes without being monitored. After 30 minutes, the smart floor cleaner will automatically shut off and stop working. If you need to continue cleaning the floor, you can press the start switch again and work again for 30 minutes. It can run continuously for more than 2 hours per full charge. (Note: It is recommended to replace the wipes every 30 minutes.)

3. The blue ones are wet wipes. After that, remove and clean the wet wipes, wring them out as much as possible, and then place them in the machine for use. They are primarily used for mopping floors. Clean the wet wipes before continuing to use them!