SIP paging adapter with PoE

SIP paging adapter with PoE

Specs:
Interfaces :

• 2x 10/100BASE-TX, 1 PoE 802.3af
• 1x 3.5mm connector for microphone or speaker

Physical Characteristics:

• Dimensions: 117 x 84 x 31 mm, 344 g
• Power Supply: DC 5V, (Transformer Not Included)
• Operating temperature: 0° ~ 40°C
• Consumption: 2 watts

*Gradstream UCM Switches require special configuration for registration.

New audio control system
The PLANET VPA-100 audio control system integrates with existing IP PBXs to provide one- and two-way audio for broadcasting. An announcement can be made via the VPA-100 simply by making a call from an IP phone using the handset, headset, or speakerphone mode. Its efficient 3.5-watt amplifier provides speakerphone coverage for the entire room or floor.


VPA-100 Universal IP Paging System
The VPA-100 registers an IP PBX extension and paging system. You can remotely power devices on and off via the IP phone or the smart button on the phone panel. A connected speakerphone allows any IP phone to broadcast voice through the VPA-100. It also supports handset mode for two-way transmission.


Adjustable to suit the user's application
The VPA-100 can be powered via a power adapter or Power over Ethernet cable, meaning the user can select any of the available power sources for convenience. The output volume, speaker input, and headphone input can be adjusted via the web user interface to make the announcement in the right environment. It can be configured in all installations, such as rooms, hallways, office floors, and more.
Complete VoIP communication
Multiple VPA-100 units can be connected to each other via a 100-meter cable using a PoE switch. They can also be optionally installed on walls or ceilings. If the IP PBX supports paging and intercom, one IP phone can make calls to multiple VPA-100 units at the same time.


Standard Compliance
With Session Initiation Protocol 2.0 (RFC 3261), the VPA-100 can work with PLANET or any third-party SIP 2.0-compliant VoIP product.